HP LaserJet 3052 Service Manual - Page 245
Print image-quality problems, Draft, EconoMode
View all HP LaserJet 3052 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 245 highlights
Toner specks appear on the printed page. . Cause Solution The media does not meet HP specifications (for example, it is Make sure that the media meets specifications detailed in too moist or too rough). the HP LaserJet Printer Family Print Media Guide. The print path needs to be cleaned. Clean the print path. See Cleaning the all-in-one on page 40. Characters are only partially printed (also referred to as dropouts). Cause Solution A single sheet of media is defective. Try reprinting the job. The print density needs to be adjusted. Adjust the print density from HP ToolboxFX. The moisture content of the paper is inconsistent, or the paper Make sure that the media meets specifications detailed in has moist or wet spots on the surface. the HP LaserJet Printer Family Print Media Guide. The paper was damaged by inconsistent manufacturing processes. Make sure that the media meets specifications detailed in the HP LaserJet Printer Family Print Media Guide. Draft mode or EconoMode is selected in the driver. Try the normal or best setting. The print cartridge is defective. Replace the print cartridge. ENWW Print image-quality problems 225