HP PSC 950 HP PSC 900 Series - (English) Reference Guide - Page 54

hp psc 900 series generate manual reports 3 Press Enter, then press to scroll through the following report types. - Every Error, which prints whenever there is any kind of fax error (default). - Send Error, which prints whenever there is a transmission error. - Receive Error, which prints whenever there is a receiving error. - Every Fax, which confirms every time a fax is sent or received. - Send Only, which prints every time a fax is sent. - Off, which does not print fax reports. 4 After the option that you want appears, press Enter. 1 Press Setup. 2 Press 1, then press Enter. 3 Press to scroll through the following report types. - 1:Last Transaction, which indicates the status of the last fax sent. - 2:Fax Log, which lists approximately the last 40 faxes sent and received. - 3:Speed Dial List, which lists your individual and group numbers. - 4:Menu Settings, which lists in outline form the entire menu system and indicates the current and default settings. - 5:Self-Test Report, which prints a self-test report. For more information, see print a self-test report in the onscreen User's Guide. - 6:Automatic Reports Setup, which is the automatic reports setting described in generate automated reports on page 47. 4 Select the report you want, then press Enter. control resolution and contrast You can change the resolution and contrast of documents that you are sending. Your changes remain in effect until you change them again. The copy settings do not affect faxing, and the fax resolution settings do not affect copying. change resolution 48 Resolution affects the transmission speed and quality of faxed documents. 1 Press Scanner and then press Fax, if not already lit. 2 Press Options until Resolution appears. 3 Press to scroll through the available options until the one you want appears. use the fax features