HP PSC 950 HP PSC 900 Series - (English) Reference Guide - Page 70
set the power save mode time, maintenance menu functions, Power Save On, Setup, Maintenance, Enter - cartridges
UPC - 725184893704
View all HP PSC 950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
hp psc 900 series 9 Enter the two-digit number corresponding to the country on the keypad. For example: for USA, you would enter 10. 10 After entering the two-digit number code, you are prompted to confirm that the language you selected is the one you want. 11 Press 1 for Yes or 2 for No. set the power save mode time The bulb in your unit remains on for a specified period so that the unit is immediately ready to respond to your request. When the unit has not been used within that specified period of time, it turns the bulb off to preserve power and displays Power Save On in the front-panel display. (You can exit this mode by pressing any button on the front panel.) Your unit is automatically set to enter power-save mode after 12 hours. Follow these steps if you want the unit to enter this mode earlier. 1 Press Setup. 2 Press 5, then press 5 again. This selects the Maintenance menu, then selects the Set Power Save Mode Time option. 3 Press until the desired time appears, then press Enter. maintenance menu functions 1:Print Report 5:Maintenance Use Setup to display the menu options. Press and to move to the setting you want. Press Enter to select the displayed setting. 1:Last Transaction 2:Fax Log 3:Speed Dial List 4:Menu Settings 5:Self-Test Report 6:Automatic Reports Setup 1:Clean Print Cartridge 2:Align Print Cartridge 3:Restore Factory Defaults 4:Reprint Faxes in Memory 5:Set Power Save Mode Time 6:Set Language and Country maintain your HP PSC 64