HP PSC 950 HP PSC 900 Series - (English) Reference Guide - Page 56

hp psc 900 series 3 Follow the messages that appear on the display. use Error Correction Mode (ECM) ECM eliminates data lost due to poor phone lines by detecting errors that occur during transmission and automatically requesting retransmission of the erroneous portion. Phone charges are unaffected, or may even be reduced, on good phone lines. On poor phone lines, ECM increases sending time and phone charges, but sends the data much more reliably. Turn ECM off (the default setting is on) only if it increases phone charges substantially and you are willing to accept poorer quality in exchange for reduced charges. 1 Press Setup. 2 Press 4, then press 7. This selects the Advanced Fax Setup menu, then selects the Error Correction Mode option. 3 Press to switch between Off and On. 4 After the state that you want appears, press Enter. set automatic reduction This setting determines what your HP PSC does if it receives a fax too large for the default paper size. With this setting on (the default), the image is reduced so that it attempts to fit on one page. With this feature off, the information that will not fit on the first page is printed on a second page. 1 Press Setup. 2 Press 4, then press 5. This selects the Advanced Fax Setup menu, then selects the Automatic Reduction option. 3 Press to switch between Off and On. 4 After the state that you want appears, press Enter. detect faxes received from older machines You can receive faxes from older fax machines that do not emit a fax signal. These silent models represent less than 5% of fax machines in use. Leave this setting off unless all the following are true: • You are having trouble receiving a fax from an older machine. • Your answering machine is connected directly to your HP PSC. 1 Press Setup. 2 Press 4, then press 8. use the fax features 50