HP PSC 950 HP PSC 900 Series - (English) Reference Guide - Page 69
restore factory defaults, set the country or language, Enter, Setup, Maintenance, Restore - cartridge
UPC - 725184893704
View all HP PSC 950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
hp psc 900 series e. Place the cartridge back into the holder. 4 Close the door and plug in the unit. Because you removed a print cartridge from its holder, the unit will need to realign the cartridges. 5 After the message appears in the front-panel display, press Enter to align the cartridge. A page prints to confirm alignment. restore factory defaults You can restore the original factory settings to what they were when you purchased your HP PSC. Choosing to restore your factory defaults restores all settings, except speed dial entries, date, and fax header information. You can only perform this process from the unit. 1 Press Setup. 2 Press 5, then press 3. This selects the Maintenance menu, then selects the Restore Factory Defaults option. The factory default settings are restored. set the country or language 1 Press Setup. 2 Press 5, then press 6. This selects the Maintenance menu, then selects the Set Language and Country menu. 3 To select the language, you can: - Press until the desired language appears. - Wait till the desired language appears on the front panel display. 4 Enter the two-digit number corresponding to the language on the keypad. For example: for English, you would enter 11. 5 After entering the two-digit number code, you are prompted to confirm that the language you selected is the one you want. 6 Press 1 for Yes and 2 for No. 7 After the language is selected, you are prompted with all the countries for that selected language. 8 To select the country, you can: - Press until the desired country appears. - Wait till the desired country appears on the front panel display. restore factory defaults 63