HP StorageWorks P2000 HP StorageWorks P2000 G3 MSA System SMU Reference Guide - Page 83
Checking links to a remote system
View all HP StorageWorks P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Checking links to a remote system After a remote system has been added, you can check the connectivity of host ports in the local system to host ports in that remote system. A port in the local system can only link to ports with the same host interface, such as Fibre Channel (FC), in a remote system. When you check links, this panel will show this information for each connected host port in the local system: • The link type • The ID of the port in the local (source) system • The ID of each accessible port in the remote (destination) system If a host port is not shown then either: • It is disconnected • Its link type is not supported by both systems To check links to a remote system 1. In the Configuration View panel, right-click a remote system and then select Tools > Check Remote System Links. 2. Click Check Links. HP StorageWorks P2000 G3 MSA System SMU Reference Guide 83