HP Z600 HP Z600 Workstation Maintenance and Service Guide - Page 208

SAS RAID 0 configuration, Press, Ctrl-C to start LSI Corp. Configuration Utility, RAID Properties

Get HP Z600 - Workstation - 6 GB RAM PDF manuals and user guides
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 208 highlights

SAS RAID 0 configuration Use the following procedure to configure an Integrated Striped (IS) volume with the BIOS-based configuration utility. The procedure assumes that the system has the required disk and disk controllers. 1. Start the LSI Corporation Configuration Utility. During BIOS start up, you are prompted to Press Ctrl-C to start LSI Corp. Configuration Utility. 2. On the Main menu of the BIOS-based configuration utility, use the arrow keys to select an adapter. 3. Press Enter to go to the Adapter Properties screen. 4. On the Adapter Properties screen, use the arrow keys to select RAID Properties, and press Enter to go to the New Array Type screen. 5. In the Select New Array Type screen, use the arrow keys to select Create IS Volume. Press Enter to go to the Create New Array screen. 6. In the Create New Array screen, use the arrow keys to select the first disk for the IS volume. Then use the arrow keys to move to the RAID Disk column for this disk, and press Space and + or - to select Yes as the value for this column. If partitions are defined on the selected disk, a message appears warning you that data on the disk will be lost when the striped volume is created. 7. Press M to migrate, or D to delete the data on the drive. 8. To select additional drives for the striped volume, up to the workstation-specific maximum number, repeat the previous steps. 9. When all drives are selected, press C to create the array once. Use the arrow keys to move to Save changes then exit this menu and press Enter. 10. When the new array is created, the Adapter Properties screen appears. Press Esc twice and select Exit. 196 Chapter 7 Configuring RAID devices ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
SAS RAID 0 configuration
Use the following procedure to configure an Integrated Striped (IS) volume with the BIOS-based
configuration utility. The procedure assumes that the system has the required disk and disk controllers.
1.
Start the LSI Corporation Configuration Utility. During BIOS start up, you are prompted to
Press
Ctrl-C to start LSI Corp. Configuration Utility
.
2.
On the Main menu of the BIOS-based configuration utility, use the arrow keys to select an adapter.
3.
Press
Enter
to go to the Adapter Properties screen.
4.
On the Adapter Properties screen, use the arrow keys to select
RAID Properties
, and press
Enter
to go to the New Array Type screen.
5.
In the Select New Array Type screen, use the arrow keys to select
Create IS Volume
. Press
Enter
to go to the Create New Array screen.
6.
In the Create New Array screen, use the arrow keys to select the first disk for the IS volume. Then
use the arrow keys to move to the RAID Disk column for this disk, and press Space and
+
or
-
to
select
Yes
as the value for this column.
If partitions are defined on the selected disk, a message appears warning you that data on the disk
will be lost when the striped volume is created.
7.
Press
M
to migrate, or
D
to delete the data on the drive.
8.
To select additional drives for the striped volume, up to the workstation-specific maximum number,
repeat the previous steps.
9.
When all drives are selected, press
C
to create the array once. Use the arrow keys to move to
Save changes then exit this menu
and press
Enter
.
10.
When the new array is created, the Adapter Properties screen appears. Press
Esc
twice and
select
Exit
.
196
Chapter 7
Configuring RAID devices
ENWW