HP Z600 HP Z600 Workstation Maintenance and Service Guide - Page 70

Clearing passwords If you forget the password, you cannot access the workstation. For instructions about clearing passwords, see Configuring password security and resetting CMOS on page 200. Chassis security Side access panel key lock The side access panel contains a key lock to prevent the panel from being removed. The key is fastened to the workstation rear panel when shipped from the factory. Side access panel sensor (Smart Cover Sensor) (optional) The optional Side access panel sensor is a combination of hardware and software technology that can alert you when the workstation side access panel has been removed (if the sensor has been configured in the Computer Setup (F10) Utility). The three levels of Side access panel sensor protection are shown in the following table: Table 4-4 Side access panel sensor protection levels Level Setting Description Level 0 Disabled Side access panel sensor * is disabled (default). Level 1 Notify User When the workstation restarts, a message appears indicating that the workstation side access panel has been removed. Level 2 Setup Password When the workstation is restarted, a message appears indicating that the workstation side access panel has been removed. You must enter the setup password to continue. * Side access panel sensor settings can be changed using the Computer Setup (F10) Utility. 58 Chapter 4 System management ENWW