HP Z600 HP Z600 Workstation Maintenance and Service Guide - Page 97
Front panel I/O cable assembly, Removing the front panel I/O cable assembly
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Front panel I/O cable assembly This section describes how to remove and install a front panel I/O cable assembly. Removing the front panel I/O cable assembly 1. Disconnect power from the workstation (seePredisassembly procedures on page 73 ). 2. Remove the side access panel (see Removing the side access panel on page 75). 3. Remove the expansion card guide/front fan holder (see Removing the front system fan on page 120). 4. Remove the lower front bezel (see Removing the lower front bezel on page 84). 5. Disconnect the front panel I/O cable assembly cables from the system board as shown in the following figure. Figure 5-13 Disconnecting the front panel I/O cable assembly cables Table 5-5 Front panel I/O cable assembly connectors Item Description 1 Front audio 2 Front USB 6. Disconnect the speaker cable (see Removing the speaker on page 79), and remove the tie wraps that secure the front panel I/O cables to the chassis. ENWW Removing and installing components 85