HP Z600 HP Z600 Workstation Maintenance and Service Guide - Page 99
Installing the front panel I/O cable assembly, Reconnect the speaker cable see
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Installing the front panel I/O cable assembly 1. With power removed and the chassis open, guide the front panel I/O cable assembly cables through the chassis openings from which they were removed. 2. Place the front panel I/O cable assembly in the chassis and guide it into position as shown in the following figure . Install the screw 2. Figure 5-15 Installing the front panel I/O cable assembly 3. Connect the front panel I/O cable assembly cables to the system board as shown in the following figure. Figure 5-16 Connecting the front panel I/O cable assembly cables Table 5-6 Front panel I/O cable assembly connectors Item Description 1 Front audio 2 Front USB 4. Reconnect the speaker cable (see Installing the speaker on page 80), and replace the tie wraps that secure the front panel I/O cables to the chassis. 5. Reinstall all removed components and reconnect all cables that have been disconnected. ENWW Removing and installing components 87