HP Z600 HP Z600 Workstation Maintenance and Service Guide - Page 66
Password security, Establishing a setup password using Computer Setup (F10) Utility
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Password security The power-on password prevents unauthorized use of the workstation by requiring entry of a password to access applications or data when the workstation is powered on or restarted. The setup password specifically prevents unauthorized access to the Computer Setup (F10) Utility and can also be used as an override to the power-on password. When prompted for the power-on password, entering the setup password instead enables access to the workstation. You can establish a network-wide setup password to enable the system administrator to log in to all network systems to perform maintenance without needing to know the power-on password. Establishing a setup password using Computer Setup (F10) Utility Establishing a setup password through the Computer Setup (F10) Utility prevents reconfiguration of the workstation (through the use of the Computer Setup (F10) Utility) until the password is entered. To establish a setup password using the Computer Setup (F10) menu: 1. Power on or restart the workstation. 2. As soon as the workstation is powered on, press and hold F10 until you enter the Computer Setup (F10) Utility. Press Enter to bypass the title screen, if necessary. If you do not press F10 at the appropriate time, you must restart the workstation, and then press and hold F10 again to access the utility. If you are using a PS/2 keyboard, you might see a keyboard error message. Disregard it. 3. Select Security>Setup Password and then follow the onscreen instructions. 4. Before exiting, select File>Save Changes and Exit. 54 Chapter 4 System management ENWW