HP xw3400 HP xw3400 Workstation - Service and Technical Reference Guide - Page 104
Type 3 Battery Holder
View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
4. Plug in the workstation and turn on power to the workstation. 5. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to Section 2.2. Type 3 Battery Holder 1. Pull back on the clip (1) that holds the battery in place, then remove the battery (2). 2. Insert the new battery and position the clip back in place. 3. Replace the workstation access panel (Access panel on page 61). 4. Plug in the workstation and turn on power to the workstation. 5. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to Section 2.2. 94 Chapter 7 Removal and replacement procedures ENWW
4
.
Plug in the workstation and turn on power to the workstation.
5
.
Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to Section 2.2.
Type 3 Battery Holder
1
.
Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2
.
Insert the new battery and position the clip back in place.
3
.
Replace the workstation access panel (
Access panel
on page
61
).
4
.
Plug in the workstation and turn on power to the workstation.
5
.
Reset the date and time, your passwords, and any special system setups, using Computer Setup.
Refer to Section 2.2.
94
Chapter
7
Removal and replacement procedures
ENWW