HP xw3400 HP xw3400 Workstation - Service and Technical Reference Guide - Page 93
Chassis fan, Remove the fan from the chassis.
View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chassis fan 1. Prepare the workstation for disassembly (Preparation for disassembly on page 59). 2. Remove the access panel and rotate the workstation so the system board is parallel to the table to make it easier to work on (Access panel on page 61). 3. Disconnect the power cable that connects the chassis fan to the system board (1). 4. Remove the four screws from the exterior rear of the chassis that secure the fan (2). 5. Remove the fan from the chassis. To install the chassis fan, reverse the removal procedure. ENWW Chassis fan 83
Chassis fan
1
.
Prepare the workstation for disassembly (
Preparation for disassembly
on page
59
).
2
.
Remove the access panel and rotate the workstation so the system board is parallel to the table to
make it easier to work on (
Access panel
on page
61
).
3
.
Disconnect the power cable that connects the chassis fan to the system board (1).
4
.
Remove the four screws from the exterior rear of the chassis that secure the fan (2).
5
.
Remove the fan from the chassis.
To install the chassis fan, reverse the removal procedure.
ENWW
Chassis fan
83