HP xw3400 HP xw3400 Workstation - Service and Technical Reference Guide - Page 87
Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until
View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
NOTE: There are a total of eight extra guide screws on the front of the chassis. Four have 6-32 standard threads and four have M3 metric threads. Standard screws are used for hard drives and have a silver finish. Metric screws are used for all other drives and have a black finish. Make sure to install the appropriate guide screws into the drive. 2. Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until the drive snaps into place. 3. Reconnect the power and data cables to the drive as shown in the following illustrations. ENWW Drives 77
NOTE:
There are a total of eight extra guide screws on the front of the chassis. Four have 6-32
standard threads and four have M3 metric threads. Standard screws are used for hard drives and
have a silver finish. Metric screws are used for all other drives and have a black finish. Make sure
to install the appropriate guide screws into the drive.
2
.
Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until
the drive snaps into place.
3
.
Reconnect the power and data cables to the drive as shown in the following illustrations.
ENWW
Drives
77