HP xw3400 HP xw3400 Workstation - Service and Technical Reference Guide - Page 123

Control panel message, Description, Recommended action, Run Computer Setup. If Setup already

Get HP xw3400 - Workstation PDF manuals and user guides View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 123 highlights

Table C-1 Numeric Codes and Text Messages (continued) Control panel message Description Recommended action 2202-PMM Deallocation Error during MEBx cleanup Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM 1. Reboot the workstation. 2. Unplug the power cord, re-seat the memory modules, and reboot the workstation. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the workstation. 4. If the error persists, replace the system board. 2203-Setup error during MEBx execution MEBx selection or exit resulted in a setup failure. 1. Reboot the workstation. 2. Unplug the power cord, re-seat the memory modules, and reboot the workstation. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the workstation. 4. If the error persists, replace the system board. 2204-Inventory error during MEBx execution BIOS information passed to the MEBx resulted 1. in a failure. 2. Reboot the workstation. If the error persists, update to the latest BIOS version. 3. If the error still persists, replace the system board. 2205-Interface error during MEBx execution MEBx operation experienced a hardware error during communication with ME. 1. Reboot the workstation. 2. If the error persists, update to the latest BIOS version. 3. If the error still persists, replace the system board. Invalid Electronic Serial Number Electronic serial number has become corrupted. 1. Run Computer Setup. If Setup already has data in the field or will not allow the serial number to be entered, download from http://www.hp.com and run SP5572.EXE (SNZERO.EXE). 2. Run Computer Setup and try to enter serial number under Security, System ID, then save changes. Network Server Mode Active and No Keyboard Attached Keyboard failure while Network Server Mode 1. Reconnect keyboard with workstation enabled. turned off. 2. Check connector for bent or missing pins. 3. Ensure that none of the keys are depressed. 4. Replace keyboard. ENWW POST numeric codes and text messages 113

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
Control panel message
Description
Recommended action
2202-PMM Deallocation Error during MEBx
cleanup
Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM
1
.
Reboot the workstation.
2
.
Unplug the power cord, re-seat the
memory modules, and reboot the
workstation.
3
.
If the memory configuration was recently
changed, unplug the power cord, restore
the original memory configuration, and
reboot the workstation.
4
.
If the error persists, replace the system
board.
2203-Setup error during MEBx execution
MEBx selection or exit resulted in a setup
failure.
1
.
Reboot the workstation.
2
.
Unplug the power cord, re-seat the
memory modules, and reboot the
workstation.
3
.
If the memory configuration was recently
changed, unplug the power cord, restore
the original memory configuration, and
reboot the workstation.
4
.
If the error persists, replace the system
board.
2204-Inventory error during MEBx execution
BIOS information passed to the MEBx resulted
in a failure.
1
.
Reboot the workstation.
2
.
If the error persists, update to the latest
BIOS version.
3
.
If the error still persists, replace the
system board.
2205-Interface error during MEBx execution
MEBx operation experienced a hardware
error during communication with ME.
1
.
Reboot the workstation.
2
.
If the error persists, update to the latest
BIOS version.
3
.
If the error still persists, replace the
system board.
Invalid Electronic Serial Number
Electronic serial number has become
corrupted.
1
.
Run Computer Setup. If Setup already
has data in the field or will not allow
the serial number to be entered,
download from
and run SP5572.EXE (SNZERO.EXE).
2
.
Run Computer Setup and try to enter
serial number under Security, System ID,
then save changes.
Network Server Mode Active and No
Keyboard Attached
Keyboard failure while Network Server Mode
enabled.
1
.
Reconnect keyboard with workstation
turned off.
2
.
Check connector for bent or missing pins.
3
.
Ensure that none of the keys are
depressed.
4
.
Replace keyboard.
Table
C
-
1
Numeric Codes and Text Messages (continued)
ENWW
POST numeric codes and text messages
113