HP xw3400 HP xw3400 Workstation - Service and Technical Reference Guide - Page 143

Solving Media Card Reader Problems continued

Page 143 highlights

Table D-5 Solving Media Card Reader Problems (continued) After installing the media card reader and booting to Windows, the reader and the inserted cards are not recognized by the workstation. Cause Solution The operating system needs time to recognize the device if the Wait a few seconds so that the operating system can recognize reader was just installed into the workstation and you are the reader and the available ports, and then recognize turning the workstation on for the first time. whatever media is inserted in the reader. After inserting a media card in the reader, the workstation attempts to boot from the media card. Cause Solution The inserted media card has boot capability. If you do not want to boot from the media card, remove it during boot or do not select the option to boot from the inserted media card during the boot process. Workstation will not boot from a USB removable drive or media that is inserted in the USB port on the media card reader. Cause Solution The media card reader is connected to the workstation via the PCI card, which is not supported on the HP Desktop BIOS. The bootable USB device will have boot support if you connect the media card reader to an available USB connector on the workstation's system board. If no connector is available, plug the bootable device into a different USB port on the workstation. After installing the media card reader, the front USB ports on the workstation do not work. Cause Solution The USB cable for the front USB ports was disconnected so that Reconnect the cable for the front USB ports. Install the PCI card the system board connector could be used for the reader. and connect the media reader to the USB connector on the PCI card. ENWW Solving media card reader problems 133

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182

After installing the media card reader and booting to Windows, the reader and the inserted cards are not
recognized by the workstation.
Cause
Solution
The operating system needs time to recognize the device if the
reader was just installed into the workstation and you are
turning the workstation on for the first time.
Wait a few seconds so that the operating system can recognize
the reader and the available ports, and then recognize
whatever media is inserted in the reader.
After inserting a media card in the reader, the workstation attempts to boot from the media card.
Cause
Solution
The inserted media card has boot capability.
If you do not want to boot from the media card, remove it during
boot or do not select the option to boot from the inserted media
card during the boot process.
Workstation will not boot from a USB removable drive or media that is inserted in the USB port on the
media card reader.
Cause
Solution
The media card reader is connected to the workstation via the
PCI card, which is not supported on the HP Desktop BIOS.
The bootable USB device will have boot support if you connect
the media card reader to an available USB connector on the
workstation’s system board. If no connector is available, plug
the bootable device into a different USB port on the workstation.
After installing the media card reader, the front USB ports on the workstation do not work.
Cause
Solution
The USB cable for the front USB ports was disconnected so that
the system board connector could be used for the reader.
Reconnect the cable for the front USB ports. Install the PCI card
and connect the media reader to the USB connector on the PCI
card.
Table
D
-
5
Solving Media Card Reader Problems (continued)
ENWW
Solving media card reader problems
133