HP xw3400 HP xw3400 Workstation - Service and Technical Reference Guide - Page 157
Solving Network Problems continued, New network card will not boot.
View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Table D-12 Solving Network Problems (continued) Network controller stops working without apparent cause. Cause Solution The files containing the network drivers are corrupted. Download the network drivers from http://www.hp.com and reinstall them. The cable is not securely connected. Ensure that the cable is securely attached to the network connector and that the other end of the cable is securely attached to the correct device. The network controller is defective. Replace the network controller. New network card will not boot. Cause Solution New network card may be defective or may not meet industry- Install a working, industry-standard NIC, or change the boot standard specifications. sequence to boot from another source. Cannot connect to network server when attempting Remote System Installation. Cause Solution The network controller is not configured properly. Verify Network Connectivity, that a DHCP Server is present, and that the Remote System Installation Server contains the NIC drivers for your NIC. System setup utility reports unprogrammed EEPROM. Cause Solution Unprogrammed EEPROM. Contact HP. ENWW Solving network problems 147