Icom IC-9100 Instruction Manual - Page 104

8 DV MODE OPERATION ■ Received call signs When a call is received in the DV mode, the calling station and repeater call signs being used can be stored in the received call record. The stored call signs can be displayed in the following manner. Up to 20 calls can be stored. D Desired call record display q Push [DV•DR] to select the DV mode. w P ush [MENU] one or more times to display the "M3" screen (Menu 3). • In the DR mode, push [MENU] once or twice to select the "D1" screen. e P ush [CD](F-2) to display the "CD" screen (Call Re- cord). r R otate [MAIN DIAL] to select the desired record channel (RX01 to RX20). • Hold down [CLR](F-4) for 1 second to clear the selected record channel. t P ush [Z](F-1) one or more times to display the call record. • CALLER : T he calling station's call sign. • / : A four character note from the station that made the call. • CALLED : T he call sign of the station that was called, or "CQCQCQ." • RXRPT1 : T he call sign of the repeater the call- ing station accessed, or the call sign of the gateway repeater the calling station used. • RXRPT2 : T he call sign of the repeater you heard the call on. • MSG : Any received message is displayed. After the MSG screen, the date and time information are displayed. If the received date and time are unknown, the elapsed time after the call was received is displayed (e.g. "(-12:34)"). If the power is turned OFF, then ON, or 48 hours have passed is displayed. y P ush [Z](F-1) one or more times to return to the "CD" screen. [√] [CD] [CLR] [MENU] [DVɾDR] [MAIN DIAL] M3 CS C D R > C S U R DSET CD ≈ JG3YMK Ú �CQCQCQ RX01 CLR COPY CD CALLER: JG3YMK Ú CALLED: CQCQCQ / COPY CD RxRPT1: Ú RxRPT2: COPY CD MSG: REPEATER IS JP3 Ú YHH A CD Ú 2010/10/10 10:10 95