Icom IC-9100 Instruction Manual - Page 44

3 BASIC OPERATION ■ Selecting a frequency band The frequency band you want to use can be selected in the MAIN and SUB Bands. Before changing the frequency band on the SUB Band, push [SUB] to turn ON the SUB Band setting mode. In addition to the HF/50 MHz, 144 MHz and 430 MHz frequency bands, the IC-9100 can operate on the 1200 MHz frequency band*1. q Hold down [BAND](MAIN/SUB) for 1 second one or more times until the desired frequency of the bands that are stored in the MAIN or SUB Band, whichever you selected. w T o call up the previously selected frequency and operating mode, push a band key or [GENE •] if the HF/50 MHz frequency band was selected in step q, or push [GENE •] if the 144 MHz, 430 MHz or 1200 MHz frequency band*1 was selected. D Using the band stacking registers The triple band stacking register provides 3 memories for each band key to store frequencies and operating modes. This function is convenient when you operate 3 operating modes on one frequency band. For example, one register can be used for a CW frequency, another for an SSB frequency and the other one for an RTTY frequency. [BAND](MAIN/SUB) Band keys [GENE •] NOTE: The same frequency band cannot be simultaneously selected in both MAIN and SUB Bands. The frequency band, selected in either the MAIN or SUB Band, cannot be selected on the other Band. If a band key or [GENE •]* is pushed once, the last used frequency and operating mode are called up. When the key is pushed again, another stored frequency and operating mode are called up. * If you are using a frequency band other than HF/50 MHz, you can call up the HF/50 MHz frequency band by pushing the band keys ([1.8 1] to [50 0] or [GENE •]). See the table below for a list of the available frequency bands and their default frequency and mode settings. BAND 1.8 MHz*1 3.5 MHz*1 7 MHz 10 MHz*1 14 MHz 18 MHz 21 MHz 24 MHz 28 MHz 50 MHz*1 144 MHz 430 MHz*1 1200 MHz*1*2 General*3 REGISTER 1 1.900000 MHz CW 3.550000 MHz LSB 7.050000 MHz LSB 10.120000 MHz CW 14.100000 MHz USB 18.100000 MHz USB 21.200000 MHz USB 24.950000 MHz USB 28.500000 MHz USB 50.100000 MHz USB 145.000000 MHz FM 433.000000 MHz FM 1295.000000 MHz FM 15.000000 MHz USB REGISTER 2 1.910000 MHz CW 3.560000 MHz LSB 7.060000 MHz LSB 10.130000 MHz CW 14.200000 MHz USB 18.130000 MHz USB 21.300000 MHz USB 24.980000 MHz USB 29.500000 MHz USB 50.200000 MHz USB 145.100000 MHz FM 433.100000 MHz FM 1295.100000 MHz FM 15.100000 MHz USB REGISTER 3 1.915000 MHz CW 3.580000 MHz LSB 7.020000 MHz CW 10.140000 MHz CW 14.050000 MHz CW 18.150000 MHz USB 21.050000 MHz CW 24.900000 MHz CW 28.100000 MHz CW 51.000000 MHz FM 145.200000 MHz FM 433.200000 MHz FM 1295.200000 MHz FM 15.200000 MHz USB *1 The default frequency and mode settings are differ depending on the version. Above list shows the USA version's. *2 The optional UX-9100 is required for the 1200 MHz frequency band operation. *3 [GENE •] selects the general coverage band. 35