Icom IC-9100 Instruction Manual - Page 129

17. Opening Call Sign (Default: OFF) Select whether or not to display MY call sign on the LCD when the transceiver is turned ON. • OFF : Turns OFF the function. • ON : Displays MY call sign at power ON. 18. BK (Default: OFF) The break-in function allows you to break into a conversation where two other stations are communicating with call sign squelch enabled. See page 116 for details. • OFF : The break-in function is set to OFF. • ON : T he break-in function is set to ON. • " " appears on the display. NOTE: The break-in function is automatically turned OFF when the transceiver is turned OFF. 19. EMR (Default: OFF) The EMR communication mode can be used for digital mode operation. In the EMR mode, no call sign setting is necessary. When an EMR mode signal is received, the audio (voice) will be heard at the specified level even if the volume setting level is set to minimum level, or digital call sign/digital code squelch is in use. See page 115 for details. • OFF : The EMR function is set to OFF. • ON : T he EMR function is set to ON. • " " appears on the display. NOTE: The EMR communication function is automatically turned OFF when the transceiver is turned OFF. 20. EMR AF Level (Default: 50%) Enter a number between 0 % (minimum) and 100 % (maximum) to set the audio output level when an EMR signal is received. When an EMR signal is received, the audio will be heard at the programmed level, or the [AF] control level, whichever is higher. 8 DV MODE OPERATION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 120