Icom IC-9100 Instruction Manual - Page 209

CT-17 ci-v level converter unit For remote transceiver control using a personal computer equipped with an RS-232C port. You can change frequencies, operating mode, memory channels, etc., via your computer. • AG-25 weather-proof preamplifier (for 144 MHz Band) • AG-35 weather-proof preamplifier (for 430 MHz Band) External all-weather, mast mounting preamplifiers for compensating for coaxial cable loss. • AG-2400 down converter unit All-weather, satellite down converter with superior NF and gain. Input frequency : 2400-2402 MHz Output frequency : 144-146 MHz Conversion gain : More than 25 dB Total NF : Less than 1.5 dB • OPC-1529R data communication cable (RS-232C type) Allows low-speed data communication in the DV mode, and receiving a GPS data from a third-party GPS receiver. • OPC-599 adapter cable 13-pin, ACC connector to 7-pin + 8-pin ACC connector. • MB-123 carrying handle Convenient when carrying the transceiver. The same as that attached with the transceiver. • UT-121 digital unit Allows the DV mode operation with the IC-9100. • CS-9100 cloning software Use this software to program settings, memory channels and set mode contents quickly and easily via your PC's USB port. A USB cable is required. (A-B type, purchase separately) • RS-BA1 ip remote control software To remotely control radios using the RS-BA1, BE SURE that you comply with your local regulations. Approved Icom optional equipment is designed for optimal performance when used with an Icom transceiver. Icom is not responsible for the destruction or damage to an Icom transceiver in the event the Icom transceiver is used with equipment that is not manufactured or approved by Icom. OPTIONS 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 200