Icom IC-9100 Instruction Manual - Page 171
User Band Edge, Beep Sound MAIN, Beep Sound SUB, RF/SQL Control, Meter Peak Hold, FM/DV Center Error
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
SET MODE 14 7. User Band Edge 13. Time Out Timer (Default: OFF) This "User Band Edge" item appears only when "ON (User)" or "User (ON) & TX" is selected in the "Band Edge Beep" item. (p. 161) When you select "ON (User)" or "ON (User) & TX" in the "Band Edge Beep" item, you can program a total of 30 band edge frequencies in this item. See page 42 for programming details. To prevent a prolonged transmission, the transceiver has a Time-Out Timer function. If a continuous transmission exceeds the set period, the transmission will be cut off. Set the time period to 3, 5, 10, 20 or 30 minutes, or turn OFF the Time-Out Timer function. 14. PTT Lock (Default: OFF) 8. Beep Sound (MAIN) (Default: 1000Hz) Turn the PTT Lock function ON or OFF. 1 Set a desired beep frequency for the MAIN Band to between 500 Hz and 2000 Hz in 10 Hz steps. To prevent accidental transmissions, this function inhibits transmitting, when turned ON. 2 You can set the beep output level in the "Beep Level" item. (p. 161) 15. Quick SPLIT 3 (Default: ON) 9. Beep Sound (SUB) (Default: 1000Hz) Turn the Quick Split function ON or OFF. 4 Set a desired beep frequency for the SUB Band to between 500 Hz and 2000 Hz in 10 Hz steps. You can set the beep output level in the "Beep Level" When this item is set to ON, hold down [SPLIT] for 1 second to shift the transmit frequency from the receive frequency, according to the "SPLIT Offset" option as described below. See page 83 for details. 5 6 item. (p. 161) 16. SPLIT Offset (Default: 0.000MHz) 7 10. RF/SQL Control (Default: RF+SQL) Set the offset* for the quick split function. 8 Set the [RF/SQL] control operation. *The difference between transmit and receive frequencies. The frequency offset can be set to between -9.999 9 • AUTO : [RF/SQL] functions as only an RF MHz and +9.999 MHz in 1 kHz steps. gain control in SSB, CW and RTTY; a 10 squelch control in AM, FM and DV. • SQL : [RF/SQL] functions as a squelch control. 17. SPLIT LOCK (Default: OFF) Turn the Split Lock function ON or OFF. 11 • RF+SQL : [RF/SQL] functions as a noise squelch or an S-meter squelch in FM; only as When this item is set to ON, you can use [MAIN DIAL] 12 an S-meter squelch in SSB, CW, RTTY, AM and DV. to adjust the transmit frequency while holding down [XFC], even while the Dial Lock function is enabled. 13 11. Meter Peak Hold (Default: ON) See pages 82, 83 for split frequency operation details. 14 Turn the Meter Peak Hold function ON or OFF. 15 When this function is set to ON, the peak level of a received signal strength or the output power is displayed 16 for approximately 0.5 seconds. 17 12. FM/DV Center Error (Default: ON) 18 Turn the FM and DV center error detection ON or OFF. 19 When an off-frequency signal is received, the MAIN and SUB Band's TX/RX indicators blink. 20 21 162