Icom IC-9100 Instruction Manual - Page 151

■ Memory contents copying The Memory channel contents (frequency, operating mode, etc.) can be copied to the VFO. The copy can be performed in either the VFO mode or the Memory mode. D Copying in the VFO mode This is useful for copying programmed contents to a displayed VFO. q Push [VFO/MEMO] to select the VFO mode. w R otate [M-CH] to select the Memory channel num- ber to be copied. • " " appears if the selected Memory channel is a blank channel. In this case nothing can be copied. e H old down [VFO/MEMO] for 1 second to copy the Memory channel contents into the VFO. • T hree beeps sound when the copy is complete. D Copying in the Memory mode This is useful for copying the Memory channel contents while operating in the Memory mode. When you have changed the displayed frequency, operating mode, etc. in the selected Memory channel: • Displayed data is copied. • Programmed contents in the Memory channel are not copied, but remain only in the Memory channel. q Push [VFO/MEMO] to select the Memory mode. w R otate [M-CH] to select the Memory channel to be copied. • " " appears if the selected Memory channel is a blank channel. In this case nothing can be copied. • Set the frequency or operating mode if required. e H old down [VFO/MEMO] for 1 second to copy the Memory channel contents into the VFO. • T hree beeps sound when the transfer is complete. r P ush [VFO/MEMO] to select the VFO mode. MEMORY OPERATION 10 [VFO/MEMO] While in the VFO mode [M-CH] Hold down M1 AGC DUP COMP TBW SCP The Memory channel contents are transferred M1 AGC DUP COMP TBW SCP While in the Memory mode Hold down M1 AGC DUP COMP TBW SCP Push M1 AGC DUP COMP TBW SCP The Memory channel contents are transferred M1 AGC DUP COMP TBW SCP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 142