Icom IC-9100 Instruction Manual - Page 127
DV Set mode description
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
8 DV MODE OPERATION ■ DV Set mode description The DV Set mode is used for programming infrequently changed values or functions in the DV mode. DSET]/[SET] D DV Set mode settings q In the DV mode, push [MENU] one or more times to display the "M3" screen (Menu 3). • In the DR mode, push [MENU] once or twice to select the "D1" screen. [MENU] [MAIN DIAL] w Push [DSET](F-5) to display the "DSET" screen. e Push [SET](F-5) to enter the DV Set mode. Displays the DV Set mode r P ush [Y](F-1) or [Z](F-2) to select the desired item. item name and number Displays the option SET Standby Beep 1 t Rotate [MAIN DIAL] to select the desired option. • Hold down [F-3] for 1 second to reset to the default set- ∫1 √ ON-1 2 ting, if desired. y P ush [MENU] to save, and return to the "DSET" 3 screen. Select the item Reset to the default setting 4 1. Standby Beep (Default: ON-1) 4. Digital Monitor (Default: Auto) 5 Turn the Standby beep function ON or OFF. Select the RX monitoring mode by holding down [XFC] 6 This function sounds a beep when the other station while in the DV mode. stops transmitting. 7 • Auto : Monitors in the DV mode or FM mode, de- • OFF : Turns OFF the function. • ON-1 : Turns ON the function to sound a beep. pending on the received signal. • Digital : Monitors in the DV mode. 8 • ON-2 : T urns ON the function to sound a beep. If the call was sent to your own call sign, the • Analog : Monitors in the FM mode. 9 beep has a higher pitch. 5. Digital RPT Set (Default: ON) 10 2. Auto Reply (Default: OFF) Turn the digital repeater setting function ON or OFF. When accessing a repeater that has a call sign dif- 11 Turn the automatic reply function ON or OFF. ferent than the transceiver's "R1" setting, this function This function automatically replies to a call addressed reads the repeater's downlink signal and automatically 12 to your own call sign, even if you are away from the sets the correct repeater call sign into "R1." transceiver. 13 This function is automatically turned OFF after you • OFF : Turns OFF the function. push [PTT] (microphone) or [TRANSMIT]. • ON : Automatically sets the repeater call sign. 14 • OFF : T urns OFF the function. • ON : T he transceiver automatically replies to the 6. RX Call Sign Write (Default: OFF) 15 call with your own call sign. Turn the RX call sign automatic write function ON or OFF. 16 3. DV Data TX (Default: PTT) When receiving a call addressed to your own call sign, this function automatically sets the call sign of the call- 17 For low-speed data communication, select whether to ing station into "UR." transmit the input data manually or automatically. While in the DR mode, this function is disabled. 18 • PTT : Push [PTT] (microphone) or [TRANSMIT] to • OFF : Turns OFF the function. 19 manually transmit the input data. • Auto : Automatically sets the call sign of the calling • Auto : W hen data is input from a PC through the station into "UR." 20 [DATA1] jack, the transceiver automatically transmits it. 21 118