Icom IC-9100 Instruction Manual - Page 202

18 CONTROL COMMAND D Data content description (continued) • Alarm area 1 setting Command : 1A 05 0159 q w 9999 e  • Repeater tone/tone squelch frequency setting Command : 1B 00, 1B 01 q* w e 0 0 X X X X 0 (fixed) 0 (fixed) 100 Hz digit 10 kHz digit 1 Hz digit 0.1 Hz digit 10 min. digit: 0-5 1 min. digit: 0-9 0.1 min. digit: 0-9 0.01 min. digit: 0-9 0.001 min. digit: 0-9 0 (fixed) *Not necessary when setting a frequency. • Unproto Address setting Command : 1A 05 0169 Set an unproto address of up to 56 characters. See 'Character code setting.' (p. 190) • DTCS code and polarity setting Command : 1B 02 q w e XX0XXX • GPS-A Symbol setting Command : 1A 05 0173 XX XX Second digit First digit ⁄, \, 0 to 9, A to Z can be used for the first digit character. See 'Character code setting' for the second digit character. (p. 190) • Comment setting Command : 1A 05 0175 Set a comment of up to 43 characters. See 'Character code setting.' (p. 190) • Comment (Extension) setting Command : 1A 05 0176 Set a comment of up to 36 characters. See 'Character code setting.' (p. 190) • GPS message setting Command : 1A 05 0177 Set a GPS message of up to 20 characters. See 'Character code setting.' (p. 190) Transmit polarity: 0: Normal 1: Reverse Receive polarity: 0: Normal 1: Reverse 0 (fixed) First digit: 0-7 Second digit: 0-7 Third digit: 0-7 • Digital code squelch setting Command : 1B 07 q XX Second digit: 0-9 First digit: 0-9 • DV MY call sign setting Command : 1F 00 Set your own call sign and note of up to 12 characters. q-i o-!2 9 9 ʜʜ 9 9 9 9 9 9 9 9 9 9 q-i Your own call sign setting o-!2 Note setting • Data mode with filter width setting Command : 1A 06 qw 9999 00: Data mode OFF 01: FIL1 02: FIL2 03: FIL3 00: Data mode OFF 01: Data mode ON 193