Icom IC-9100 Instruction Manual - Page 206
Specifications
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
19 SPECIFICATIONS ■ General • Frequency coverage : (unit: MHz) Receive 0.030-60.000*1*2 136.000-174.000*1*2 420.000-480.000*1*2 1240.000-1320.000† Transmit 1.800-1.999*2, 3.500-3.999*2, 5.33050*3, 5.34650*3, 5.36650*3, 5.37150*3, 5.40350*3, 7.000-7.300*2, 10.100-10.150*2, 14.000-14.350*2, 18.068-18.168*2, 21.000-21.450*2, 24.890-24.990*2, 28.000-29.700*2, 50.000-54.000*2 144.000-148.000*2, 430.000-450.000*2 1240.000-1300.000† *1Some frequency bands are not guaranteed. *2Depending on version. *3USA version only. • Mode : USB, LSB, CW, RTTY, AM, FM, DV* *The optional UT-121 is required. • No. of memory channels : 297CH (99CH × 3 band) (396CH with UX-9100‡; 99CH × 4 bands) • No. of scan edge memory channels : 18CH (6 × 3 band) (24CH with UX-9100‡; 6CH × 4 bands) • N o. of call channels : 3CH (1 × 3 band) (4CH with UX-9100‡; 1CH × 4 bands) • N o. of Satellite memory channels : 20CH • Antenna connector : SO-239 × 3 Type-N × 2 • Antenna impedance : 50 ø (at Antenna Tuner OFF) • Usable temperature range : 0˚C to +50˚C (+32˚F to +122˚F) • Frequency stability : Less than ±0.5 ppm 5 min. after power ON. (0˚C to +50˚C; +32˚F to +122˚F) • Frequency resolution : 1 Hz • Power supply : 13.8 V DC ±15% (negative ground) • Power consumption Transmit Max. power : 24.0 A (HF/50/144/430 MHz band) 9.0 A (1200 MHz band)† Receive Standby : 3.0 A (HF/50/144/430 MHz band) 4.0 A (1200 MHz band)† Max. audio : 4.5 A (HF/50/144/430 MHz band) 5.5 A (1200 MHz band)† • Dimensions : 315(W) × 116(H) × 343(D) mm (projections not included) 12.4(W) × 4.57(H) × 13.5(D) in • Weight (approximately) : 11.0 kg; 24.2 lb 11.95 kg; 26.3 lb (with UX-9100) • ACC connector : 13-pin • CI-V connector : 2-conductor 3.5 (d) mm (1⁄8″) ■ Transmitter • Output power (continuously adjustable) Frequency band HF/50 MHz 144 MHz 430 MHz 1200 MHz† Output power 2 to 100 W (AM: 2 to 30 W)* 2 to 100 W 2 to 75 W 1 to 10 W (at 13.8 V DC/+25˚C) * In the AM mode, transmission can be performed only on the HF/50 MHz frequency band. • Modulation system SSB : Digital PSN modulation AM : Digital Low power modulation FM : Digital Phase modulation DV* : GMSK Digital Phase modulation *The optional UT-121 is required. • Spurious emission (Spurious domain) HF bands : Less than -50 dB 50/144 MHz band : Less than -63 dB 430 MHz band : Less than -61.8 dB 1200 MHz band† : Less than -53 dB (Out-of-band domain) HF bands : Less than -40 dB 50/144/430 MHz band: Less than -60 dB 1200 MHz band† : Less than -50 dB • Carrier suppression : More than 40 dB • Unwanted sideband suppression : More than 55 dB (1200 MHz: More than 40 dB)† • ∂TX variable range : ±9.999 kHz • Microphone connector : 8-pin connector • Microphone impedance : 600 ø • ELEC-KEY connector : 3-conductor 6.35(d) mm (1⁄4″) • KEY connector : 3-conductor 6.35(d) mm (1⁄4″) • SEND connector : Phono jack (RCA) • ALC connector : Phono jack (RCA) † The optional UX-9100 is required for 1200 MHz frequency band operation. ‡ Only when the 1200 MHz frequency band is selected. 197