Icom IC-9100 Instruction Manual - Page 15

1 PANEL DESCRIPTION #2 VFO SELECT SWITCH [A/B] (pp. 32, 34) ➥ Push to select either VFO A or VFO B. ➥ H old down for 1 second to equalize the undisplayed VFO settings to that of the displayed VFO. #3 SPLIT SWITCH [SPLIT] (p. 82) ➥ Push to turn the split function ON or OFF. • "SPLIT" appears when the split function is ON. • T he split function is not selectable on the SUB Band. ➥ Hold down for 1 second to activate the quick split function. • The transmit frequency shifts from the receive frequency according to the "SPLIT Offset" option in the Set mode. (p. 162) • The quick split function can be turned OFF in the "Quick SPLIT" item of the Set mode. (p. 162) #4 SUB SWITCH [SUB] ➥ Push to turn the SUB Band setting mode ON or OFF. (p. 33) • " " appears when the SUB Band setting mode is ON. ➥ Hold down for 1 second to turn the SUB Band display ON or OFF. (p. 32) #5 M AIN/SUB•BAND SWITCH [MAIN/SUB•BAND] ➥ Push to toggle between the MAIN Band and the SUB Band. (p. 32) ➥ Hold down for 1 second one or more times to select HF/50 MHz, 144 MHz, 430 MHz or 1200 MHz frequency band as your operating band. (p. 35) • T he frequency band, selected in either the MAIN or SUB Band, cannot be selected on the other Band. #6 SATELLITE SWITCH [SATELLITE] (p. 153) ➥ Push to enter the satellite mode (receive on MAIN Band, transmit on SUB Band). • " " appears. • T he last operated frequencies (downlink and uplink) and tracking icon (" "/" ") appears. ➥ In the satellite mode, push to return to the previ- ous screen display. NOTE: In the DR mode, pushing [SATELLITE] cancels DR, and then switches the transceiver to the satellite mode. If you want to operate in the DR mode after exiting the satellite mode, you must hold down [DV•DR] for 1 second. ➥ Hold down for 1 second to transfer the uplink and downlink frequencies into the satellite VFO. • T he satellite mode is automatically selected after transferring. • " " appears. • T he last operated tracking icon (" "/" ") appears. • T o toggle the tracking operation between normal and reverse, push [NOR/REV] (7 3). ➥ In the satellite mode, hold down for 1 second to return to normal operation using the displayed frequencies. #7 BAND KEYS/KEYPAD BAND KEYS Operation (pp. 35, 36) When the HF/50 MHz frequency band is not selected in both the MAIN or SUB Band, you can select the HF/50 MHz frequency band by just holding down the band key for 1 second. (Frequency band: HF/50 MHz) ➥ Push to select the operating band. • [GENE •] selects the general coverage band. ➥ Pushing the same key two or three times calls up other stacked frequencies in the frequency band. • Icom's triple band stacking register memorizes three frequencies in each frequency band. (Frequency band: 144/430/1200 MHz) ➥ Pushing [GENE •] two or three times calls up other stacked frequencies in the frequency band, after selecting the 144 MHz, 430 MHz or 1200 MHz frequency band by holding down [BAND](MAIN/SUB) for 1 second. ➥ Hold down for 1 second to switch the operating band to the HF/50 MHz frequency band. • [GENE •] selects the general coverage band. • Pushing the same key two or three times calls up other stacked frequencies in the frequency band. KEYPAD Operation (p. 37) After pushing [F-INP ENT], push the keys on the keypad to enter a frequency. After entering, push [F-INP ENT] to set the frequency. • Example: To enter 14.195 MHz; Push [F-INP ENT] [1] [4] [•] [1] [9] [5] [F-INP ENT]. NOTE: The frequency band, selected in either the MAIN or SUB Band, cannot be selected on the other Band. While in the satellite mode, the keypad operation is different than described above. See page 154 for details. The optional UX-9100 is required for 1200 MHz frequency band operation. The optional UT-121 is required for DV mode operation. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 6