Icom IC-9100 Instruction Manual - Page 105

8 DV MODE OPERATION D One-touch reply using the call record The calling station's call sign, which is stored in the call record, can be used to quickly and easily reply. • First, set your own call sign (MY). (p. 85) [TRANSMIT] [R>CS] • After receiving a call q P ush [MENU] one or more times to display the "M3" screen (Menu 3). • In the DR mode, push [MENU] once or twice to select the "D1" screen. w H old down [R>CS](F-3) for 1 second to set the other station's call sign. • T he received call sign is displayed while holding down [R>CS](F-3), and after releasing, two beeps sound. • W hen a call sign has not been received correctly, error beeps sound, and no call sign is set. e P ush [PTT] on the microphone to reply the call. (or push [TRANSMIT] on the transceiver) r R elease [PTT] to receive. (or push [TRANSMIT] again) [MAIN DIAL] 1 M3 CS C D R > C S U R DSET 2 Hold down M3 +(:., 3 CS C D R > C S U R DSET The received call sign is displayed while hold- 4 ing down [R>CS](F-3). 5 • Selecting a call record q P ush [MENU] one or more times to display the "M3" 6 screen (Menu 3). Important! • In the DR mode, push [MENU] once or twice to select One-touch call signs are for only temporary use. They 7 the "D1" screen. are not saved in a call sign memory. Therefore, when w W hile holding down [R>CS](F-3), rotate [MAIN another call sign is set, the previous call sign will be 8 DIAL] to select the desired record channel, then re- over-written. lease [R>CS](F-3) to set it. If you want to save the set call sign, see 'Copying the 9 e P ush [PTT] on the microphone to reply the call. (or call record contents into call sign memory' for details. push [TRANSMIT] on the transceiver) r R elease [PTT] to receive. (or push [TRANSMIT] (p. 98) 10 again) 11 ✔For your information 12 When you receive a call addressed to your own call sign, the call signs of the calling station and the re- 13 peaters they used can be automatically set for a quick reply. The set call signs are overwritten if another call 14 is received. The following items must be set to "Auto" in the DV Set 15 mode. These functions are not available in the DR mode. • "RX Call Sign Write" item (p. 118): 16 The calling station's call sign is automatically set to "UR." 17 • "RX RPT Write" item (p. 119): The repeater call signs are automatically set to "R1" 18 and "R2," if necessary. 19 20 21 96