Icom IC-9100 Instruction Manual - Page 90
TX function, Monitor function
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
6 FUNCTIONS FOR TRANSMIT ■ ∂TX function The ∂TX function shifts the transmit frequency up to ±9.99 kHz in 10 Hz steps* without changing the receive frequency. *The [RIT/∂TX] control tunes in 1 Hz steps when the operating frequency readout is set to the 1 Hz step readout. However, the 1 Hz digit is not displayed on the frequency shift readout. q Push [∂TX] to turn ON the ∂TX function. • "∂TX" and the frequency shift appear when the function is ON. w Rotate [RIT/∂TX]. e T o reset the ∂TX frequency, hold down [CLEAR] for 1 second. • Push [CLEAR] momentarily to reset the ∂TX frequency when the Quick RIT Clear function is ON. (p. 164) r To cancel the ∂TX function, push [∂TX] again. • "∂TX" and the frequency shift disappear. When the RIT and ∂TX functions are ON at the same time, [RIT/∂TX] shifts both the transmit and receive frequencies from the displayed frequency at the same time. ✔ For your convenience- Calculate function The frequency shift of the ∂TX function can be added to or subtracted from the displayed frequency. ➥ While displaying the ∂TX frequency shift, hold down [∂TX] for 1 second. D ∂TX Monitor function When the ∂TX function is ON, holding down [XFC] allows you to listen to the transmit frequency (including the ∂TX frequency offset). ■ Monitor function The Monitor function allows you to monitor your transmit IF signals in any mode. Use this to check voice characteristics while adjusting transmit parameters. (p. 169) The CW sidetone functions regardless of the [MONITOR] setting. q P ush [MONITOR] to turn ON the Monitor function. • "MONI" appears when the Monitor function is ON. w H old down [MONITOR] for 1 second to display the "MONI" screen (Monitor). e Rotate [MAIN DIAL] to adjust the monitor level. • For the clearest audio output, adjust while holding down [PTT] and speaking into the microphone. • Hold down [F-3] for 1 second to reset to the default setting, if desired. r Push [MENU] to return to the previous menu. 81 [CLEAR] [∂TX] [RIT/∂TX] Appears M1 AGC DUP COMP TBW SCP [XFC] [MENU] [F-3] [MONITOR] Appears [MAIN DIAL] MONI MONITOR Level Shows the monitor level 50%