Icom IC-9100 Instruction Manual - Page 47

3 BASIC OPERATION D Quick Tuning function The operating frequency can be changed in 'kHz' or 'MHz' steps for quick tuning. Select the desired tuning step in each operating frequency band and mode. q P ush [TS] to select the 'kHz' or 'MHz' Quick Tuning function step, or turn it OFF. • W hile the quick tuning icon, "Z," is displayed above the 1 kHz or 1 MHz digit, the frequency will be changed in 'kHz' or 'MHz' steps. • W hen the function is OFF, the frequency will be changed in 10 Hz steps. w R otate [MAIN DIAL] to change the frequency in the selected steps. NOTE: • T o turn OFF the Quick Tuning function, push [TS] again. ("Z" disappears) • W hen the Quick Tuning function is OFF, the fre- quency will be changed in 10 Hz steps. D Selecting 'kHz' step When the 'kHz' quick tuning is selected, the frequency can be changed in the selected 'kHz' steps. The MAIN and SUB Bands use the common 'kHz' tuning step. You can select it in both Band's. q P ush [TS] to turn ON the Quick Tuning function. • "Z" appears. w H old down [TS] for 1 second to display the "TS" screen to select the quick tuning step. e Select the desired operating mode. r R otate [MAIN DIAL] to select the desired 'kHz' step. • 0.1, 1, 5, 6.25, 9, 10, 12.5, 20, 25, 50 and 100 kHz are selectable. • H old down [F-3] for 1 second to return to the default setting, if desired. t R epeat steps e and r to select quick tuning steps for other modes. y Push [TS] to exit the "TS" screen. NOTE: To display the "TS" screen, the Quick Tuning function must be turned ON first. [TS] Appears [MAIN DIAL] TS [F-3] SSB [TS1] k H z Mode selection [MAIN DIAL] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 38