Icom IC-9100 Instruction Manual - Page 60

4 RECEIVE AND TRANSMIT ■ Electronic keyer functions (Continued) D Memory keyer send menu Pre-set characters can be sent using the Keyer Send menu. Contents of the memory keyer are set in the Edit menu. • Transmitting q In the CW mode, push [MENU] to display the "M1" screen (Menu 1). w Push [KEY](F-4) to display the "KEY" screen (Mem- ory Keyer). e P ush [SEND](F-2) to display the "SEND" screen (Keyer Send). r P ush [TRANSMIT] to switch the transceiver to transmit, or turn ON the Break-in function. (p. 79) t P ush one of the function keys, [M1](F-1) to [M4](F-4), to send the memory keyer contents. • Holding down a function key for 1 second repeatedly sends the contents; push any function key to cancel the transmission. • The contest number counter advances each time the contents are sent. • Push [−1](F-5) to reduce the contest number advances by 1 before sending the memory keyer contents to a station a second time. • Set the memory keyer repeat interval to between 1 and 60 seconds (1 second steps) in the "Keyer Repeat Time" item of the Keyer Set mode. (p. 54) y Push [MENU] to return to the "KEY" screen (Memory Keyer). u P ush [MENU] to return to the "M1" screen (Menu 1). For your information When an external keypad is connected to pin 3 and pin 7 of the [MIC] connector, the contents of M1 to M4 can be transmitted without selecting the keyer send menu. See page 167 for details. SEND M1 M2 M3 M4 001 -1 • M1 sending display SEND CQ TEST CQ TE M1 M2 M3 M4 001 -1 • M2 sending display Counter SEND UR 5NN001 BK M1 M2 M3 M4 001 -1 Count up trigger icon • M3 sending display SEND CFM TU M1 M2 M3 M4 001 -1 • M4 sending display SEND QRZ? M1 M2 M3 M4 001 -1 • While transmitting repeatedly SEND CQ TEST CQ TE [ M 1] M2 M3 M4 " [ " and " ] " appear 001 -1 51