Icom IC-9100 Instruction Manual - Page 178
Tone control Set mode description
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
14 SET MODE ■ Tone control Set mode description D The Tone control Set mode settings q P ush [MENU] one or more times to display the "M2" screen (Menu 2). w P ush [TCON](F-4) to enter the Tone control Set mode. e P ush a mode switch to select the desired operating mode. r P ush [Y](F-1) or [Z](F-2) to select the desired item. • Selectable items differ, depending on the selected operating mode. t Rotate [MAIN DIAL] to select the desired option. • Y ou can select the option for each operating mode. • Hold down [F-3] for 1 second to reset to the default setting, if desired. y P ush [MENU] to save, and exit the Set mode. F-3] [TCON] [MENU] Mode switches [MAIN DIAL] Displays the Set mode item name and number Displays the selected operating mode TCON R X H P F ⁄ L P F Ù 1Ú [ ---]- SSB - - - Displays the option Select the item Reset to the default setting 1. RX HPF/LPF (Default: OFF) (Mode: SSB/CW/RTTY/AM/FM/DV) First select the operating mode, then set the receive audio high-pass filter to between 100 Hz and 2000 Hz in 100 Hz steps. 2. RX HPF/LPF (Default: OFF) (Mode: SSB/CW/RTTY/AM/FM/DV) First select the operating mode, then set the receive audio low-pass filter to between 500 Hz and 2400 Hz in 100 Hz steps. 3. RX Bass (Mode: SSB/AM/FM/DV) (Default: 0) First select the operating mode, then set the receive audio bass level to between -5 and +5. 4. RX Treble (Mode: SSB/AM/FM/DV) (Default: 0) First select the operating mode, then set the receive audio treble level to between -5 and +5. 5. TX Bass (Mode: SSB/AM/FM/DV) (Default: 0) First select the operating mode, then set the transmit audio bass level to between -5 and +5. 6. TX Treble (Mode: SSB/AM/FM/DV) (Default: 0) First select the operating mode, then set the transmit audio treble level to between -5 and +5. 7. TBW(WIDE) L (Mode: SSB) (Default: 100) Set the lower cut-off frequency of the transmission passband width for your wide setting to 100, 200, 300 or 500 Hz. 8. TBW(WIDE) H (Mode: SSB) (Default: 2900) Set the higher cut-off frequency of the transmission passband width for your wide setting to 2500, 2700, 2800 or 2900 Hz. NOTE: • W hen the receive audio high-pass or low-pass filter is active, "RX Bass" and "RX Treble" items will be reset to the default value. • W hen the receive audio bass or receive audio treble level is set, "RX HPF/LPF" items (1 and 2) will be turned OFF. 169