Icom IC-9100 Instruction Manual - Page 124
EMR communication
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
8 DV MODE OPERATION ■ EMR communication The EMR (Enhanced Monitor Receive) communication mode can be used in only the DV mode. In the EMR mode, no call sign setting is necessary. When an EMR mode signal is received, the audio (voice) will be heard at the specified level, even if the volume setting level is set to the minimum level, or digital call sign/digital code squelch is in use. q Select the desired frequency band. (p. 35) w S et the desired frequency. (p. 37) e In the DV mode, push [MENU] one or more times to display the "M3" screen (Menu 3). • In the DR mode, push [MENU] once or twice to select the "D1" screen. r P ush [DSET](F-5) to display the "DSET" screen. t P ush [SET](F-5) to enter the DV Set mode. y P ush [Y](F-1) or [Z](F-2) to select "EMR." u R otate [MAIN DIAL] to turn ON the EMR mode. • " " appears. i P ush [MENU] to return to the "DSET" screen. o P ush [PTT] on the microphone to transmit. (or [TRANSMIT] on the transceiver) • The MAIN Band TX/RX indicator lights red. !0 R elease [PTT] to receive. (or push [TRANSMIT] again) • " " blinks when receiving an EMR signal. NOTE: The EMR communication function is automatically turned OFF when the transceiver is turned OFF. [TRANSMIT DSET]/[SET] MAIN Band [MENU] TX/RX indicator Appears [MAIN DIAL] SET EMR ∫ 19 √ ON When the EMR communication mode is ON. D Adjusting the EMR AF level The audio output level when an EMR signal is received is adjustable. When an EMR signal is received, the audio will be heard at the preset level, or the [AF] control level, whichever is higher. q In the DV mode, push [MENU] one or more times to display the "M3" screen (Menu 3). • In the DR mode, push [MENU] once or twice to select the "D1" screen. w Push [DSET](F-5) to display the "DSET" screen. e Push [SET](F-5) to enter the DV Set mode. r P ush [Y](F-1) or [Z](F-2) to select "EMR AF Level." t R otate [MAIN DIAL] to adjust the EMR audio out- put level between 0% (minimum) and 100% (maximum). • Hold down [F-3] for 1 second to reset to the default set- ting, if desired. y Push [MENU] to return to the "DSET" screen. 115 SET E M R A F L e v e l Ù 20 Ú 50% (default) 50%