Icom IC-9100 Instruction Manual - Page 14

1 PANEL DESCRIPTION ■ Front panel (continued) #1 #2#3#4#5 #6 #7 @9 #0 @9 MODE SWITCHES [DV•DR] (p. 85) Push to select your desired operating mode. (p. 43) ➥ Push to select the DV mode. • The built-in speech synthesizer announces the selected • "DV" appears. mode when the "SPEECH [MODE] SW" item is set to ➥ Hold down for 1 second to select the DR mode. "ON" in the Set mode. (p. 164) • " " appears. [SSB] (p. 47) ➥ Push to alternately select the USB or LSB modes. ➥ In the DR mode, push to cancel it. • " " disappears. • "USB" or "LSB" appears. ➥ In the SSB mode, hold down for 1 second to se- lect the SSB data mode (USB-D, LSB-D). • "D" appears in addition to "USB" or "LSB." ➥ In the SSB data mode, push to return to the normal SSB mode. #0 FILTER SWITCH [FILTER] (p. 73) ➥ Push to select one of three IF filter settings T he selected filter passband width and shifting value are displayed for 2 seconds on the LCD display. ➥ Hold down for 1 second to display the "FIL" [CW/RTTY] (pp. 48, 56) screen (Filter) to set the filter passband width. ➥ Push to alternately select the CW or RTTY modes. ➥ When the "FIL" screen is displayed, hold down for 1 second to return to the previous screen display. • "CW" or "RTTY" appears. ➥ Hold down for 1 second to switch between the CW and CW-R (CW reverse) modes, in the CW mode. • "CW-R" appears when the CW reverse mode is selected. ➥ Hold down for 1 second to switch between the RTTY and RTTY-R (RTTY reverse) modes in the RTTY mode. • "RTTY-R" appears when the RTTY reverse mode is selected. #1 TRANSMIT FREQUENCY CHECK SWITCH [XFC] ➥ During split frequency or repeater operation, hold down to listen to the transmit frequency. (p. 82) • While holding down this switch, the transmit frequency can be changed with the main dial, keypad or memo pad. • When the split lock function is turned ON, push [XFC] to cancel the dial lock function. (pp. 82, 162) ➥ When the RIT function is turned ON, hold down to listen to the receive frequency. (RIT is temporarily cancelled.) (p. 69) [AM/FM] (p. 61) ➥ When the ∂TX function is turned ON, hold down ➥ Push to alternately select the AM or FM modes. to listen to the transmit frequency (including ∂TX • "AM" or "FM" appears. frequency offset). (p. 81) ➥ Hold down for 1 second to select the AM or FM ➥ In the simplex operation, hold down to listen to data mode (AM-D/FM-D). • "D" appears in addition to "AM" or "FM." the receive frequency. • The squelch is closed and the interference reject ➥ In the data mode, push to return to the normal function is temporary OFF while holding down this AM or FM mode. switch. NOTE: • In the AM mode, you can transmit on only the ➥ In the DV mode, the RX monitoring mode is selected by holding down this switch. (p. 118) HF/50MHz frequency bands. • T he AM mode cannot be selected on the 1200 MHz frequency band. 5