Icom IC-9100 Instruction Manual - Page 94
Dv Mode Programming
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
7 DV MODE PROGRAMMING The optional UT-121 is required for DV mode operation. ■ Call sign programming Four types of call signs are used; "MY" (your own call sign) "UR" (destination call sign, whether it is an individual or a repeater.) "R1" (your access/area repeater call sign) and "R2" (a destination or gateway repeater call sign). Each call sign can be programmed with up to 8 characters. In addition, you can store up to 6 "MY" call signs, and up to 99 "UR" call signs in the call sign memory. Up to 500 repeater call signs can be stored in the repeater list. D "MY" (Your own call sign) programming Your own call sign must be programmed for both digital voice and low-speed data communications (including GPS transmission). q Push [DV•DR] to select the DV mode. w P ush [MENU] one or more times to display the "M3" screen (Menu 3). • In the DR mode, push [MENU] once or twice to select the "D1" screen. e P ush [CS](F-1) to display the "CS" screen (Call Sign). r P ush [Z](F-1) one or more times to display the "MY" screen (MY call sign setting). t R otate [MAIN DIAL] to select MY1, 2, 3, 4, 5, or 6 call sign memory. y P ush [EDT](F-3) to enter the call sign programming mode. • A cursor appears and blinks. u R otate [MAIN DIAL] to select the first character to input. When inputting numbers, push the appropriate keypad key. • Push [DEL](F-4) to delete the selected character or number. • Push [SPC](F-5) to input a space. i P ush [Ω](F-2) to move the cursor backwards, or push [≈](F-3) to move the cursor forwards. o Repeat steps u and i to enter your own call sign. • A call sign of up to 8 digits can be set. • T o program a note (up to 4 characters, for operating radio type, area, etc.), go to step !0, otherwise go to step !2. !0 P ush [≈](F-3) to move the cursor right side of "/". !1 R epeat steps u and i to program the desired 4 character note. !2 P ush [MENU] to store the programmed call sign and note. !3 Push [MENU] again to return to the "CS" screen. [CS]/[√] [EDT] [MENU] [DVɾDR] [MAIN DIAL] M3 CS C D R > C S U R DSET CS UR CQCQCQ Ú MY R1 R2 NOT USE MY ≈ Ú CLR / MY1 EDT NAME MY / MY1 Ω ≈ DEL SPC • Programing a call sign [Ω] [≈] Number input Cursor MY Ω [DEL][SPC] [MAIN DIAL] / MY1 ≈ DEL SPC Input a space Delete a character Move cursor forwards Move cursor backwards 85