Icom IC-9100 Instruction Manual - Page 113
Making a call to an individual station through
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
8 DV MODE OPERATION Making a call to an individual station through a link repeater in the same zone (Zone call) Zone q w e r Area MY call signɿ Repeater q ɿNARA43 (JP3YHL) Station call signɿ JA3YUA Repeater r ɿIKOMA-43 (JP3YHJ) JG3YMK u R otate [MAIN DIAL] to select the link repeater in the same zone. • Only repeaters with the same gateway repeater appear. i P ush [UR](F-4) to exit the selection mode. o P ush [PTT] on the microphone to transmit. (or [TRANSMIT] on the transceiver) • The MAIN Band TX/RX indicator lights red. !0 R elease [PTT] to receive. (or push [TRANSMIT] again) If you want to save this temporary setting, push [MW] to enter the memory select write mode. (p. 102) Making a call to an individual station through a gateway repeater (Gateway call) q w Area MY call signɿ JA3YUA Zone A e r Gateway Repeater eɿHIRANO43 (JP3YHH G) Repeater yɿHAMA43 (JP1YIU G) Zone B t y u i Gateway Station call signɿ JM1ZLK u R otate [MAIN DIAL] to select "GW." • The pre-programmed gateway repeater is set as R2. • Only repeaters with the same gateway repeater appear. i P ush [UR](F-4) to exit the Link repeater (R2) selection mode. o P ush [PTT] on the microphone to transmit. (or [TRANSMIT] on the transceiver) • The MAIN Band TX/RX indicator lights red. !0 R elease [PTT] to receive. (or push [TRANSMIT] again) If you want to save this temporary setting, push [MW] to enter the memory select write mode. (p. 102) [TRANSMIT] [UR] [MW] MAIN Band TX/RX indicator [MAIN DIAL] D1 R 2: I K O M A − 4 3 CS C D R > C S U R DSET Link repeater in the same zone [TRANSMIT] [UR] [MW] MAIN Band TX/RX indicator [MAIN DIAL] D1 R 2: G W CS CD R>CS UR DSET Gateway repeater "GW" NOTE: If other station has accessed a repeater at least once, the D-STAR system will automatically connect to the last repeater the station accessed, even if you don't know where the station is. So it is no need to select the destination repeater. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 104