Icom IC-9100 Instruction Manual - Page 20
Ci-v Remote Control Jack [remote] - problems
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
1 PANEL DESCRIPTION ■ Rear panel (Continued) o !0 !1 !2 !3 !4 !5 !6 !7 !8 o GROUND TERMINAL [GND] (p. 22) Connect this terminal to a ground to prevent electri- cal shocks, TVI, BCI and other problems. !0 TUNER CONTROL SOCKET [TUNER] (p. 29) Connect the control cable from an optional AH-4 hf/ 50 mhz automatic antenna tuner. !1 DATA1 JACK [DATA1] (pp. 26, 168) ➥ Connect a PC through the optional OPC-1529R data communication cable, for low-speed data communication in the DV mode. (p. 117) ➥ Connect a GPS receiver through the optional OPC-1529R data communication cable, for GPS operation. (p. 121) !2 DATA2 SOCKET [DATA2] (pp. 26, 171) Connect a TNC (Terminal Node Controller), etc. for high speed data communications. !3 STRAIGHT KEY JACK [KEY] (p. 24) Connect a straight key or external electronic keyer output using a standard 1⁄4 inch plug. • To use the internal electronic keyer for CW operation, connect to [ELEC-KEY] on the front panel. (p. 1) (+) (_) !4 ALC INPUT JACK [ALC] (p. 25) Connect to the ALC output jack of a non-Icom linear amplifier. !5 SEND CONTROL JACK [SEND] (p. 25) When transmitting, goes to ground to control an ex- ternal unit, such as a non-Icom linear amplifier. !6 ACCESSORY SOCKET [ACC] Connect control lines for external equipment such as a linear amplifier, an automatic antenna selector/ tuner, a TNC for data communications, etc. • See page 13 for socket information. !7 C I-V REMOTE CONTROL JACK [REMOTE] (pp. 26, 183) ➥ Connect a PC, using the optional CT-17 ci-v level converter, for external control of the transceiver. ➥ Use for transceive function with another Icom CI-V transceiver or receiver. When the transceive function is set to ON, changing the frequency, operating mode, etc. on the IC-9100 automatically changes those settings on other Icom transceivers or receivers, and vice versa. (p. 167) ➥ Connect another IC-9100, using a mini plug cable*, for transceiver to transceiver cloning. * Purchase separately 11