Icom IC-9100 Instruction Manual - Page 74
Repeater operation
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
4 RECEIVE AND TRANSMIT ■ Repeater operation A repeater receives transmitted signals and re-transmits them on a different frequency. When using a repeater, the transmit frequency is shifted from the receive frequency by a frequency offset. A repeater can be accessed using the duplex operation to set the frequency shift to the same value as the repeater's frequency offset. See page 94 for details on accessing a D-STAR® repeater. q Select the desired frequency band. (p. 35) w Push [VFO/MEMO] to select the VFO mode. e Push [A/B] to select VFO A. r Push [AM/FM] to select the FM mode. t R otate [MAIN DIAL] to set the receive frequency (repeater output frequency). When the auto repeater function is turned ON (available in only the U.S.A. and Korea versions), steps y and u are not necessary. (p. 67) y P ush [MENU] to display the "M1" screen (Menu 1), then push [DUP](F-2) one or more times to set the offset direction. • "DUP-" or "DUP+" appears. • T he transmit frequency (repeater input frequency) appears on the function display. • T he frequency offset (amount of shift) can be set in the "DUP Offset" item of the Set mode. (p. 163) u Push [TON](F-4) to turn ON the repeater tone. • "T" appears. • T he tone frequency can be set in the "TON" screen. 88.5 Hz is set by default. (p. 62) i Communicate in the normal way. [DUP] [TON] [A/B] [AM/FM] [MAIN DIAL] Appears Appears M1 AGC 145.92000 DUP AFC TON Appears SCP D Repeater access tone frequency setting Some repeaters require a subaudible tone to be accessed. Subaudible tones are superimposed on your normal signal and must be set first. You can select 50 tones from 67.0 Hz to 254.1 Hz. q In the FM mode, push [MENU] to display the "M1" screen (Menu 1). w P ush [TON](F-4) one or more times to turn ON the tone encoder function. • "T" appears. e H old down [TON](F-4) for 1 second to display the "TON" screen. • "Rptr Tone" appears on the function display. r R otate [MAIN DIAL] to select the desired repeater tone frequency. (See the table to the right.) t P ush [MENU] to save, and exit the "TON" screen. TON R p t r T o n e TON SCAN 88.5Hz • Available tone frequencies (unit: Hz) 67.0 85.4 107.2 136.5 165.5 186.2 210.7 254.1 69.3 088.5 110.9 141.3 167.9 189.9 218.1 71.9 091.5 114.8 146.2 171.3 192.8 225.7 74.4 094.8 118.8 151.4 173.8 196.6 229.1 77.0 097.4 123.0 156.7 177.3 199.5 233.6 79.7 100.0 127.3 159.8 179.9 203.5 241.8 82.5 103.5 131.8 162.2 183.5 206.5 250.3 65