Icom IC-9100 Instruction Manual - Page 57

4 RECEIVE AND TRANSMIT ■ Operating CW q Select the desired frequency band. (p. 35) w Push [CW/RTTY] to select CW. • After the CW mode is selected, hold down [CW/RTTY] for 1 second to toggle between CW and CW-R modes, if necessary. e R otate [MAIN DIAL] to tune a desired signal. • The S-meter displays the received signal strength. • The tuning step can be changed using the tuning step program mode. (p. 38) r R otate [AF] (MAIN Band) to adjust the audio to a comfortable listening level. t Push [TRANSMIT] to transmit. • The TX/RX indicator (MAIN Band) lights red. y U se the electric keyer or paddle to key your CW signals. • The Po meter indicates transmitted CW output power. u Adjust CW speed with [KEY SPEED]. • Adjustable between 6 and 48 wpm (words per minute). i Push [TRANSMIT] to receive. [TRANSMIT] TX/RX indicator (MAIN Band) [AF] [CW/RTTY] (MAIN Band) "CW" or "CW-R" appears [MAIN DIAL] Convenient Receive functions • Preamp and attenuator (p. 71) • Twin PBT (passband tuning) (p. 75) • AGC (auto gain control) (p. 72) • Noise blanker (p. 76) • Noise reduction (p. 77) • Manual Notch filter (p. 77) • CW pitch control (p. 49) • ¼ function (p. 39) M1 ConvenAieG ntCTranDsUmPit fun1c/ t4ionsK E Y • Break-in function (p. 79) • Keying speed setting (p. 49) • Memory keyer (p. 50) SCP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 48