Icom IC-9100 Instruction Manual - Page 207

SPECIFICATIONS 19 ■ Receiver • Receive system HF/50/144/430 MHz band: Double superheterodyne system 1200 MHz band† : Triple superheterodyne system • Intermediate frequencies 1st : 64.455 MHz (HF/50 MHz band) 10.850 MHz (144 MHz band) 71.250 MHz (430 MHz band) 243.950 MHz (1200 MHz band)† 2nd : 36 kHz (HF/50/144/430 MHz) 10.950 MHz (1200 MHz)† 3rd : 36 kHz (1200 MHz)† • Sensitivity SSB, CW : 0.16 µV (1.80-29.99 MHz)*1 (10 dB S/N) BW=2.4 kHz 0.13 µV (50.0-54.0 MHz)*2 0.11 µV (144/430/1200† MHz) AM (10 dB S/N) : 12.6 µV (0.5-1.799 MHz)*1 BW=6 kHz 2.0 µV (1.80-29.99 MHz)*1 1.6 µV (50.0-54.0 MHz)*2 1.4 µV (144/430 MHz) FM (12 dB SINAD) : 0.5 µV (28.0-29.7 MHz)*1 BW=15 kHz 0.32 µV (50.0-54.0 MHz)*2 0.18 µV (144/430/1200† MHz) DV (1% BER) : 1.0 µV (28.0-29.7 MHz)*1 CH Space=12.5 kHz 0.63 µV (50.0-54.0 MHz)*2 0.35 µV (144/430/1200† MHz) • Squelch sensitivity Frequency band Squelch sensitivity SSB : Less than 5.6 µV*1 HF FM : Less than 0.3 µV*1 50 MHz SSB : Less than 5.6 µV*2 FM : Less than 0.3 µV*2 SSB : Less than 1.0 µV 144/430 MHz FM : Less than 0.18 µV 1200 MHz† SSB : Less than 1.0 µV FM : Less than 0.18 µV *1 Preamp 1 is ON. *2 Preamp 2 is ON. • Selectivity (IF filter shape is set to SHARP.) SSB (BW: 2.4 kHz) : More than 2.4 kHz/-6 dB Less than 3.4 kHz/-40 dB CW (BW: 500 Hz) : More than 500 Hz/-6 dB Less than 700 Hz/-40 dB RTTY (BW: 500 Hz) : More than 500 Hz/-6 dB Less than 800 Hz/-40 dB AM (BW: 6 kHz) : More than 6.0 kHz/-6 dB Less than 10.0 kHz/-40 dB FM (BW: 15 kHz) : More than 12.0 kHz/-6 dB Less than 22.0 kHz/-40 dB DV (CH space: 12.5 kHz): More than -50 dB • Spurious and image rejection ratio HF/50 MHz band* : More than 70 dB *except IF through on 50 MHz band 144/430 MHz band : More than 60 dB 1200 MHz band† : More than 50 dB • AF output power : More than 2.0 W at 10% (at 13.8 V DC) distortion with an 8 ø load • AF output impedance : 8 ø • RIT variable range : ±9.999 kHz • PHONES connector • External SP connector • DSP ANF attenuation • DSP MNF attenuation • DSP NR attenuation : 3-conductor 6.35 (d) mm (1⁄4″) : 2-conductor 3.5 (d) mm (1⁄8″)/8 ø : More than 30 dB (with 1 kHz single tone) : More than 70 dB : More than 6 dB (noise rejection in SSB) ■ Antenna tuner • Matching impedance range HF bands : 16.7 to 150 ø unbalanced (Less than VSWR 1:3) 50 MHz band : 20 to 125 ø unbalanced (Less than VSWR 1:2.5) • Minimum operating input : 8 W (HF bands) power 15 W (50MHz band ) • Tuning accuracy : VSWR 1:1.5 or less • Insertion loss : Less than 1.0 dB (after tuning at RF power 100 W) All stated specifications are typical and subject to change without notice or obligation. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 198