Icom IC-9100 Instruction Manual - Page 82
IF filter selection
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
5 FUNCTIONS FOR RECEIVE ■ IF filter selection The transceiver has 3 passband width IF filters for each mode. The filter selection is automatically memorized in each mode. The PBT shift frequencies are automatically memorized in each filter. D IF filter selection q Select the desired mode. w P ush [FILTER] one or more times to select IF filter 1, 2 or 3. • T he selected passband width and filter number is dis- played on the LCD. D Filter passband width setting (Mode: SSB/CW/RTTY/AM) q H old down [FILTER] for 1 second to display the "FIL" screen (Filter) to set the filter passband width. w Select either the SSB, CW, RTTY or AM mode. • Passband widths for FM and DV modes are fixed and cannot be set. e P ush [FILTER] one or more times to select IF filter 1, 2 or 3. r P ush [BW](F-1), then rotate [MAIN DIAL] to adjust the desired passband width. Then push [BW](F-1) to set it. • While holding down [BW](F-1), rotating [MAIN DIAL] also adjusts the passband width. After adjustment, release [BW](F-1) to set it. • H old down [F-3] for 1 second to reset to the default setting, if desired. t Repeat steps w to r if desired. y P ush [MENU] to save, and exit the "FIL" screen. Mode IF filter Adjustable range (steps) SSB FILTER1 (3.0 kHz) FILTER2 (2.4 kHz) 50 to 500 Hz (50 Hz) 600 to 3600 Hz (100 Hz) FILTER3 (1.8 kHz) SSB-D CW FILTER1 (1.2 kHz) FILTER2 (500 Hz) FILTER3 (250 Hz) 50 to 500 Hz (50 Hz) 600 to 3600 Hz (100 Hz) RTTY FILTER1 (2.4 kHz) FILTER2 (500 Hz) 50 to 500 Hz (50 Hz) 600 to 2700 Hz (100 Hz) FILTER3 (250 Hz) AM AM-D FILTER1 (9.0 kHz) FILTER2 (6.0 kHz) 200 Hz to 10 kHz (200 Hz) FILTER3 (3.0 kHz) FM FM-D DV FILTER1 (15 kHz) FILTER2 (10 kHz)* Fixed FILTER3 (7.0 kHz)* * When FILTER2 or FILTER3 is selected in the FM mode, the 73 TX modulation changes to the narrow mode (2.5 kHz). [FILTER] Filter selection M1 AGC B2.4K S 0 DUP COMP TBW SCP The selected filter width is displayed when [FILTER] is pushed. • "FIL" screen display FIL B 2.4K S BW 0 SSB-2 2.4K SHARP Shows the selected filter and passband width. • While adjusting the passband width Blinks Appears FIL B 2.4K S BW 0 SSB-2 2.4K SHARP Reverses Push [BW](F-1), then rotate [MAIN DIAL] to adjust the passband width. Then push [BW](F-1), The PBT shift frequencies are cleared when the passband width is changed. This "FIL" screen (Filter) graphically displays the PBT shift frequencies and passband width.