Icom IC-9100 Instruction Manual - Page 88
Break-in function
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
6 FUNCTIONS FOR TRANSMIT ■ Break-in function (Mode: CW) The Break-in function is used in the CW mode to automatically toggle the transceiver between transmit and receive when keying. The IC-9100 is capable of Full Break-in or Semi Break-in. [MENU] [CW/RTTY] D Semi Break-in operation During Semi Break-in operation, the transceiver immediately transmits when you key down, then returns to receive after a pre-set delay time has passed after you stop keying. q Push [CW/RTTY] to select the CW or CW-R mode. w P ush [VOX/BK-IN] one or more times to turn ON the Semi Break-in function. • "BK-IN" appears. e S et the break-in delay time (the delay from transmit to receive). ➥ Hold down [VOX/BK-IN] for 1 second to display the "BKIN" screen (Break-in). ➥ Rotate [MAIN DIAL] to select the desired delay. • Hold down [F-3] for 1 second to reset to the default setting, if desired. r Push [MENU] to return to the previous menu. When using a paddle, rotate [KEY SPEED] to adjust the keying speed. D Full Break-in operation During Full Break-in operation, the transceiver transmits when you key down, then immediately returns to receive when you release. q Push [CW/RTTY] to select the CW or CW-R mode. w P ush [VOX/BK-IN] one or more times to turn ON the Full Break-in function. • "FBK-IN" appears. When using a paddle, rotate [KEY SPEED] to adjust the keying speed. [KEY SPEED] [VOX/BK-IN] [MAIN DIAL] Appears BKIN Break-IN Delay Shows break-in delay time 7.5d Appears M1 AGC DUP 1⁄4 KEY SCP 79