Icom IC-9100 Instruction Manual - Page 62

4 RECEIVE AND TRANSMIT ■ Electronic keyer functions (Continued) D Contest number Set mode This mode is used to set the contest number, count up trigger and Present number. • Setting contents q In the CW mode, push [MENU] to display the "M1" screen (Menu 1). w P ush [KEY](F-4) to display the "KEY" screen (Mem- ory Keyer). e P ush [001](F-4) to enter the Contest Number Set mode. r P ush [Y](F-1) or [Z](F-2) to select the desired item. t R otate [MAIN DIAL] to select the desired option. • Hold down [F-3] for 1 second to reset to the default setting, if desired. y Push [MENU] to save, and return to the "KEY" screen (Memory Keyer). u P ush [MENU] to return to the "M1" screen (Menu 1). 1. Number Style (Default: Normal) This item sets the numbering system used for contest numbers- normal or short morse numbers. Short morse numbers are also referred to as "cut" numbers. • Normal : Does not use short morse numbers • 190➔ANO : Sets 1 as A, 9 as N and 0 as O. • 190➔ANT : Sets 1 as A, 9 as N and 0 as T. • 90➔ NO : Sets 9 as N and 0 as O. • 90➔ NT : Sets 9 as N and 0 as T. 2. Count Up Trigger (Default: M2) Set the count-up trigger to one of four memory slots for the contest number exchange. The count-up trigger allows the contest number to automatically advance after each complete number exchange is sent. • M1, M2, M3 or M4 can be set. 3. Present Number (Default: 001) This item shows the current number for the count-up trigger channel set above. • Rotate [MAIN DIAL] to change the number, or hold down [CLR](F-3) for 1 second to reset the current number to 001. 001 Number Style ∫1 √ Normal Select the item Reset to the default setting 53