Icom IC-9100 Instruction Manual - Page 83
st IF filter selection, IF DSP filter shape
View all Icom IC-9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
5 FUNCTIONS FOR RECEIVE D 1st IF filter selection (Mode: SSB/CW/RTTY/AM) The IC-9100 has a 15 kHz filter passband width at the 1st IF frequency. The 1st IF filters reduce interference from strong nearby signals. If the optional FL-430 1st if filter (6 khz) is installed, a 6 kHz filter width can be used. Or, if the FL-431 1st if filter (3 khz) is installed, a 3 kHz filter width can be used. • T he filter passband width can be selected on only the HF/50 MHz band frequency. q H old down [FILTER] for 1 second to display the "FIL" screen (Filter). w Select SSB, CW, RTTY or AM mode. • T he passband widths for FM and DV modes are fixed, and have no options. e H old down [F-5] for 1 second to select the desired filter width from 15 kHz, 6 kHz and 3 kHz. • Hold down [F-3] for 1 second to reset to the default filter setting, if desired. (The filter passband width setting is also reset to the default setting.) r P ush [MENU] to save, and exit the "FIL" screen. D IF (DSP) filter shape (Mode: SSB/CW) A soft or sharp type of DSP filter shape for both SSB and CW can be independently selected. q H old down [FILTER] for 1 second to display the "FIL" screen (Filter). w Select the SSB or CW mode. e P ush [F-5] once or twice to select either the soft or sharp filter shape. r P ush [MENU] to save, and exit the "FIL" screen (Fil- ter). [F-3] [F-5] [MENU] [FILTER] FIL B 2.4K S BW 15 kHz is selected. 0 SSB-2 2.4K R:15K SHARP [F-5] [MENU] [FILTER] FIL B 2.4K S BW 0 SSB-2 2.4K SHARP FIL B 2.4K S BW Push 0 SSB-2 2.4K SOFT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 74