Icom IC-9100 Instruction Manual - Page 97

7 DV MODE PROGRAMMING ■ Repeater list You can store repeater information for quick and simple communication in up to 500 repeater memory channels (Repeater list) in up to 10 Groups. Programming the repeater list is required for DR mode operation. The outline of the repeater list is as follows: q Adding new repeaters or editing a list w Selecting a repeater to edit e P rogramming repeater data (Repeater name, Call sign, Gateway repeater call sign, Repeater group, etc.) If a call sign has been programmed, you can skip other data programming, and write only the call sign into the Repeater list. r P rogramming access repeater data (Receive frequency, Duplex direction, Frequency offset) D Repeater list contents The following contents are included in the repeater list: m CLR (Repeater list clearing) (p. 92) m ADD (Repeater list addition) (p. 89) m EDT (Repeater list editing) (p. 91) m NAME (Repeater name) (p. 89) m CS (Repeater call sign) (p. 89) m GW (Gateway repeater's call sign) (p. 90) m GROUP (Repeater group) (p. 90) m R1 USE (Access repeater use) (p. 90) m FREQ (Repeater input frequency)* (p. 90) m DUP (Duplex direction)* (p. 91) m OFFSET (Frequency offset)* (p. 91) m A DD Write (Save and add to the repeater list) (pp. 91, 92) m OVER Write (Save and overwrite to the repeater list) (p. 92) *Appears when R1 USE is selected as YES. • To select the Repeater list entry mode q In the DV mode, push [MENU] one or more times to select the "M3" screen (Menu 3). • In the DR mode, push [MENU] once or twice to select the "D1" screen. w P ush [DSET](F-5) to display the "DSET" screen. e P ush [RP-L](F-4) to display the "RP-L" screen (Re- peater list). In the DV mode M3 CS C D R > C S U R DSET DSET TXM RP-L SET RP-L R e p e a t e r L i s t CLR ADD EDT NOTE: Repeater lists can be erased by static electricity, electric transients, etc. In addition, they can be erased by an equipment malfunction, and during repairs. Therefore, we recommend that memory data be backed up externally, or be saved to a PC using the optional CS-9100 cloning software. RPT-L q CLR ADD EDT e NAME CS GW GROUP R1USE NO r YES FREQ DUP OFFSET ADD Write w Repeater 1 Repeater 5 NAME CS GW GROUP R1USE NO YES FREQ DUP OFFSET ADD Write OVER Write In the DR mode D1 3 GRP1 CS C D R > C S U R DSET DSET TXM RP-L SET RP-L R e p e a t e r L i s t CLR ADD EDT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 88