Intel SR2400SYSD2 User Guide - Page 106

Installing the Chassis Cover

Get Intel SR2400SYSD2 - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 106 highlights

14. Secure the power distribution module to the chassis with two screws. See letter "B" in the figure below for screw locations. A B B AF00443 Figure 74. Installing the Power Distribution Module 15. Connect the main power, CPU power, and power signal from the power supply to the server board. Refer back to Figure 64 and see your server board documentation to locate the connection points for these cables. 16. Install the air baffle. For instructions on installing the baffle and you have hot-swap drives installed, see "Installing the Large Hot-swap Air Baffle (Backplane Installed)." For instructions on installing the baffle if you are using fixed drives, see "Installing the Fixed Drive Air Baffle (No Backplane Installed)." 17. (Hot-swap system only): Connect the 2x3 power cable to the backplane. Refer back to Figure 65 for a diagram of this connection point. 18. (Fixed drive system only): Connect the 2x3 power cable to the SATA power adapter cable Refer back to Figure 66 to see how these cables connect. 19. (Hot-swap system only): Connect the flex cable to the server. Refer back to Figure 63 and see your server board documentation to locate the connection points for this cable. 20. Install the hot-swap power supply/supplies. For instructions, see "Installing a Hot-swap Power Supply." 21. Install the PCI riser assembly. For instructions, see "Installing the PCI Riser Assembly." 22. Install the processor air duct. For instructions, see "Installing the Processor Air Duct." 23. Install the chassis cover. For instructions, see "Installing the Chassis Cover." 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
82
14. Secure the power distribution module to the chassis with two screws. See letter “B” in the
figure below for screw locations.
B
A
AF00443
B
Figure 74.
Installing the Power Distribution Module
15. Connect the main power, CPU power, and power signal from the power supply to the server
board. Refer back to Figure 64 and see your server board documentation to locate the
connection points for these cables.
16. Install the air baffle. For instructions on installing the baffle and you have hot-swap drives
installed, see “
Installing the Large Hot-swap Air Baffle (Backplane Installed)
.” For instructions
on installing the baffle if you are using fixed drives, see “
Installing the Fixed Drive Air Baffle
(No Backplane Installed)
.”
17.
(Hot-swap system only): Connect the 2x3 power cable to the backplane. Refer back to Figure
65 for a diagram of this connection point.
18. (Fixed drive system only): Connect the 2x3 power cable to the SATA power adapter cable
Refer back to Figure 66 to see how these cables connect.
19. (Hot-swap system only): Connect the flex cable to the server. Refer back to Figure 63 and see
your server board documentation to locate the connection points for this cable.
20. Install the hot-swap power supply/supplies. For instructions, see “
Installing a Hot-swap Power
Supply
.”
21. Install the PCI riser assembly. For instructions, see “
Installing the PCI Riser Assembly
.”
22. Install the processor air duct. For instructions, see “
Installing the Processor Air Duct
.”
23. Install the chassis cover. For instructions, see
“Installing the Chassis Cover.”