Intel SR2400SYSD2 User Guide - Page 52
Removing and Installing the Fan Module, Removing the Fan Module
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Removing and Installing the Fan Module Some installation processes will require that you remove and later re-install the fan module. The steps below describe how to remove and then install this component. Use these steps only when it is indicated as necessary for a component installation process. Removing the Fan Module 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information." 2. Power down the server and unplug all peripheral devices and the AC power cable or DC external source. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. Disconnect the fan module cable from the fan module. 5. Pull up on the release tab at the left side of the fan module to release it from the chassis. See letter "A" in the figure below. 6. Slide the fan module to the left until it stops. 7. Lift the module from the chassis floor. See letter "B" in the figure. 8. (Hot-swap systems only): Disconnect the fan distribution cable from the backplane. 9. Remove the fan module from the chassis. A B TP01183 Figure 22. Removing the Fan Module 28