Intel SR2400SYSD2 User Guide - Page 49

Installing the Small Hot-swap Air Baffle (Backplane Installed), Installing a Replacement SATA or SCSI

Get Intel SR2400SYSD2 - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Hardware Installations and Upgrades Installing the Small Hot-swap Air Baffle (Backplane Installed) 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information." 2. Power down the server and unplug all peripheral devices and the AC power cable or DC external source. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. Remove the fan module. For instructions, see "Removing the Fan Module." 5. Remove the backplane. For instructions, see "Removing a SATA or SCSI Backplane." 6. Lower the small baffle into the chassis behind the drive bay area, using your notes from the air baffle removal steps to re-route any cables. 7. Insert the two hooks on the baffle into the matching slots at the rear of the drive area. See letter "A" in the figure below. Figure 19. Installing the Small Hot-swap Air Baffle 8. Install the backplane. For instructions, see "Installing a Replacement SATA or SCSI Backplane." 9. Install the fan module. For instructions, see "Installing the Fan Module." 10. Return to the procedure that directed you to install the small air baffle. Intel® Server Chassis SR2400/SR2400DC User Guide 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
Hardware Installations and Upgrades
Intel® Server Chassis SR2400/SR2400DC User Guide
25
Installing the Small Hot-swap Air Baffle (Backplane Installed)
1.
Observe the safety and ESD precautions at the beginning of this book. See “
Safety
Information
.”
2.
Power down the server and unplug all peripheral devices and the AC power cable or DC
external source.
3.
Remove the chassis cover. For instructions, see “
Removing the Chassis Cover
.”
4.
Remove the fan module. For instructions, see “
Removing the Fan Module
.”
5.
Remove the backplane. For instructions, see “
Removing a SATA or SCSI Backplane
.”
6.
Lower the small baffle into the chassis behind the drive bay area, using your notes from the air
baffle removal steps to re-route any cables.
7.
Insert the two hooks on the baffle into the matching slots at the rear of the drive area. See letter
“A” in the figure below.
Figure 19.
Installing the Small Hot-swap Air Baffle
8.
Install the backplane. For instructions, see “
Installing a Replacement SATA or SCSI
Backplane
.”
9.
Install the fan module. For instructions, see “
Installing the Fan Module
.”
10. Return to the procedure that directed you to install the small air baffle.