Intel SR2400SYSD2 User Guide - Page 96
Replacing the Power Supply Distribution Module (AC Version)
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Replacing the Power Supply Distribution Module (AC Version) ✏ NOTE This procedure only applies to the AC version of the Intel® Server Chassis SR2400. If you are replacing a power distribution module for the Intel® Server Chassis SR2400DC, see "Replacing the Power Supply Distribution Module (DC Version)" for instructions. The power supply distribution module is at the front of the power supply. This module can be replaced if it fails. To replace the power supply distribution module, use the following instructions. 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information." 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. Remove the air baffle. If you are using fixed drives, see "Removing the Fixed Drive Air Baffle (No Backplane Installed)" for instructions. If you are using hot-swap drives, see "Removing the Large Hot-swap Air Baffle (Backplane Installed)" for instructions. 5. Remove the hot swap power supply/supplies. For instructions, see "Removing a Hot-swap Power Supply." 6. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly." 72