Intel SR2400SYSD2 User Guide - Page 91
Installing a PCI Riser Connector,
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Hardware Installations and Upgrades Installing a PCI Riser Connector 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information." 2. Power down the server and unplug all peripheral devices and the AC power cable or DC external source. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. Remove processor air duct. For instructions, see "Removing the Processor Air Duct." 5. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly." 6. Line up the screws on the riser assembly with the slot and the large hole on the riser connector. 7. Press and hold the blue riser locking lever. See letter "A" in the figure below. 8. Place riser connector onto the retention pins. 9. Slide the riser connector toward the front of the riser module to lock it into place. See letter "B" in the figure. 10. Release the blue locking lever. A B TP01313 Figure 59. Installing a PCI Riser Connector 11. Install the PCI add-in card(s), if desired. For instructions, see "Installing a PCI Add-in Card." 12. Install the PCI riser assembly into the chassis. For instructions, see "Installing the PCI Riser Assembly." 13. Install the processor air duct. For instructions, see "Installing the Processor Air Duct." 14. Install the chassis cover. For instructions, see "Installing the Chassis Cover." Intel® Server Chassis SR2400/SR2400DC User Guide 67